We can now navigate to any web browser you prefer, and in the URL address bar, type in the IP address of your printer and hit enter. Once you have changed your computer's IP settings, check that you are directly connected via Ethernet to the printer and that the printer is powered on. The default gateway is not required if connected locally to the printer, but if you're connecting over a network, you should input this too (10.1.10.254 in our current example).

Any IP address between 10.1.10.1 and 10.1.10.255 will work (except for 10.1.10.157 since that is the connected printer's IP address in our current example). Using the above example, let's configure our computer to match the network information from above.

Plug the printer into the computer via an ethernet cable.įor MAC, follow the instructions here to change your computer's IP settings: cįor PC, follow the instructions here to change your computer's IP settings: Remember this information as we will be configuring our computer to the same network. Look for the TCP/IP settings on this sheet. Your Network Config slip that prints out should look similar to the image above. Using something thin enough (like a paper clip), push and hold the reset button until the Network Config sheet prints out.

On the back of the printer, find the 'Reset' button.You will not be able to print the Network Configuration page if the printer is OFF. If you do not have this printer model or have a different Epson Impact print, contact the Clover Sport Help team at (512) 291-6192 OPTION 1. The purpose of this guide is to configure an Epson TM-U220b Network Impact Printer to work with the Bypass point of sale system.

Paper for epson m188d printer